Monday, December 15, 2008

How to save money on gas

Gas prices have crawled all the way down to prefuel crisis costs. We have a new President on the scene and everything is rosy, or is it? Regardless of how you feel or lean politically, one thing you can be sure of is this: gas prices will rise again! In fact, they are going to skyrocket over the short run. Where does that leave all of us? Dependent on big oil to have mercy on us. That,, my friends is a seriously flawed position to be in. The answer s not in hoping gas prices stay down but making ourselves no longer dependent on big oil. How do we do that? The answer is found in water. That's right, water! Let me explain further:
What was once a novel idea and science fiction to many is now fact: You can run your car on water. Actually. A 50/50 mix of gas and water to be more precise. Through a process known as hydrolysis or brown's gas, we now have the technology to mix water with gas and in turn you get ½ of the gas bill you would otherwise, it is cleaner on the environment, and it will actually help your car to run longer over time. If this sounds like a bunch of nonsense then consider the following:
1. The US Army recently purchased a fleet of Hummers with the gas and water technology built in. 2. Thousands are already driving with this technology and have been doing so for years and report nothing but positive results. 3. Major media outlets have run hundreds of reports in which they also reported very positive findings.
If you would like to know more about this rapidly expanding and money saving technology then check out the link below. It leads to an objective review f the leading water for gas technology products.
We all agree that something has to be done about gas prices rising above the roof. Why Water for Gas is worth checking out.
Article Source: http://EzineArticles.com/?expert=George_Knoechel

Gas4free review- can gas 4 free system power a car?

I am sure that you have heard of the Gas4Free system. The owner of the system claims that its users are able to build their own DIY hydrogen generator to extract a gas HHO from water to be used as energy for running a car. Does it really work or is it just a myth? I decided to purchase this system to test it out myself, and this article will discuss the power generator system and what exactly does it do.
1. What Is The Gas4Free System All About?
This guide gives you instructions and photo screen-shots of all the materials and parts that you will need to start building your hydrogen generator system. There are also step-by-step instructions and photos that made it very easy for me to finish building the system within minutes.
2. Is This Hydrogen Generator Dangerous to Use?
Contrary to popular belief, this system is actually very safe because it creates energy on demand, and the gas that is extracted is not pure hydrogen gas. The gas, also known as Brown Gas, consists of 2 hydrogen atoms and 1 oxygen atom after being separated for water, and is thus very safe to use.
3. Should You Get The Gas 4 Free System?
The fuel source created by Gas4Free is much more efficient and cleaner compared to using diesel fuel or gasoline. It has certainly increased my car's mileage, and I do recommend drivers to build this system into their cars. The entire system would not harm your automobile in any way, and is very simple to build with the step-by-step instructions included in the guide. My car has also experienced an increase in engine life.
Is the Gas 4 Free system a scam? Visit http://www.top-review.org/gas4free.htm to read a FREE report about this water fuel system!
Article Source: http://EzineArticles.com/?expert=Judd_Marshall

Our daily carnage on the roads

Ratepayers and taxpayers alike have been brainwashed into believing two things, firstly all accidents are the result of bad driving, or drink, secondly that there is not enough money available to carry out road improvement schemes. As a result we all believe that we are ourselves are entirely to blame for the sorry state of affairs and the authorities are exonerated from blame, when in fact it is they who are to blame.
We get the same advice and suggestions from the authorities year after year, which is without any value whatsoever, this means we are paying for something we do not need, but of course they will not want to change anything, that may stop the flow of money that is allocated to them, and so it continues, we get the lip service full of rubbish and poppycock, so this allows them to put forward some other scheme of skulduggery, that will not bring about any benefit for the whole community.
Of the vast amount of money taken from ratepayers and motorists, 44 billion only, a small percentage 8 billion is used for road building and maintenance, yet the cost of picking up the pieces after the yearly carnage is greater, a loss that has gone on for over twenty five years, this eternal waste of the long suffering ratepayer needs change, not consultants to identify the epidemic, cancer and carnage that exits on the Highways.
Ignoring new ideas is to continue down the same road, to prefer precedent to progress, looking back instead of forward, holding on to old ways, that have no benefit to any road user, in fact this is one of the biggest problems we have to put up with, their apathy, this should be brought out in to the open that they are showing no interest in certain ideas, when in fact some methods will improve our roads and with a shrinking budget save us money, as well as creating over 1million jobs and a superior service, that will be of benefit all road users and relieve pressure and stress from the police, fire brigade, ambulance and hospital staff as well as the business world.
Accidents on our roads are to put it mildly, a direct result of poor Government legislation, bad vehicle design, confusing traffic regulations by local authorities, a very low standard of road conditions including insufficient illumination in darkness. All over the Country they appear to avoid the dangers that exist, so driving standards befits a situation where 27 million vehicles on the roads, are not being considered.
Our roads are only capable of carrying one third of that number, so this avoidance of care and the dangers must be creating a golden nest egg for the Authorities.
Speed cameras, road pricing, pay-as-you-drive tolls brought about by educated nutcases, and thousands of individuals with degrees in their hands form prestigious universities who view the conditions and circumstances that surround them as very frightening, but are they seeing what they are looking at? NO.
My name is Malcolm Manby a road safety consultant with over 54 years experience who has also invented new ideas to bring about safer roads and to reduce road accidents by 75% at night. Abolishing the carnage from our road, with the absolute safety device that gives drivers the true width and alignment of the road ahead with a continuous line of light on both sides of the road as far as drivers can see, creating a superior service at less cost, showing the way ahead with new ideas that will save many lives, at the same time creating over 1 million jobs which are badly needed in the whole of the country, improving conditions, standards, drivers behaviour, attention and concentration.
Article Source: http://EzineArticles.com/?expert=Malcolm_Manby

Wholesale auto auctions- where to get the best deals

If you are looking for a great deal on a used vehicle, then you need to know how to cut out the middle man and go straight to the wholesale auto auctions where the dealers get their vehicles. Did you know that used cars are typically marked up by almost 200%. That means when you pay $5,000 for a vehicle the dealer payed less than $2,000 for that same vehicle at the wholesale auto auctions?
You can cut the middle man out and go get your great deal with no hassle. When I was quite a bit younger I lost my job and my vehicle was repossessed. When this happens they normally take it to auction and sell it. This vehicle was 2 years old, had less than 20,000 miles on it, had upgraded rims and stereo, and was worth nearly $10,000. It sold for a whopping $2,900 at the auction to whomever bid on it.
Had I known this before I would have gone and bought my vehicle, then turned around and sold it to help pay off what I still owed on it. This is why car auctions are so great. This was an incredible deal for whom ever bought it and an eye opening experience for me.
Because of this experience I now buy all of my vehicles at wholesale auto auctions and when I see a red hot deal I pick up an extra vehicle so that I can turn around and sell it for a profit. I probably buy 4-5 vehicle each month and usually I can profit around $10,000 or more each month. I put in very little time and it is a pretty easy money maker that anybody can use.
All I do is list the vehicle for sale in the paper after getting my mechanic to give it a full inspections, I double the price from whatever I paid for it and usually it sells within a week. This is a great little business or you can just use this knowledge to go and buy a vehicle for yourself and get it at a fraction of the price.
The only real secret that I have is the type of wholesale auto auctions I go to. I have a database that I am a member of and it gives me the best seized auto auctions and other types of auto auctions that are not being advertised anywhere else. This give me the chance to be bidding on vehicles that only a handful of other people are bidding on and most of the time I can bid without ever even going to the auction.
Click Here and gain access to the Largest Database of Government Seized Car Auctions on the Internet!
Article Source: http://EzineArticles.com/?expert=Shelby_Johnson_II

Car alarm systems and leading manufacturers

Car alarm systems range from basic to highly advanced. Manufacturers distribute a wide variety, mostly one-way car alarms. Two-way car alarm systems are mostly distributed in developed nations.
Most car tracking system now employs the technology of Global Positioning System. It can track movements of stolen vehicles.
Many car alarm companies have highly advanced equipment and computer testing system to carefully test alarms before distribution. Alarms undergo simulation testers and temperature chambers to ensure reliability.
The engineering departments develop high and technically advanced car alarms to satisfy the special requirement and certification of countries worldwide. Manufacturers also offer the most affordable cost, effective shipping methods, and highest quality of products.
Manufacturers are looking for ways to mass produce hybrid car alarms abreast with the standards of the National Insurance Crime Bureau for vehicle security. Hybrid alarms are more durable and in many ways better than traditional car alarms. Most manufacturers concentrate on improving the quality, enhancing stability, reducing power consumption and improving control range. They even distribute accessories like central locking kits and reversing sensors.
Mainland China ranks number 4 among the world's largest car manufacturers. Their production is estimated at 5.1 million in 2004 and the actual sales reached 5 million units. Because China has a big local market, car security industry has also expanded, serving both the domestic and foreign markets.
Taiwan has moved most of its production of basic car security alarm to the mainland and scaled down its own manufacturing. Nevertheless, it focused on providing comprehensive car security solutions and satisfies car manufacturer's specific requirements.
The increasing demand of car security products in China is steadily sustainable. International players continually strengthen their presence in China. They are attracted with the potential growth of these security products in the country. Both Taiwanese and Chinese manufacturers have penetrated the car security OEM (original equipment manufacturer) market.
The Directed Electronics Inc. is one of the largest companies in the world distributing car security products. It is the company behind Viper car alarms. It is widely appraised for its great features and benefits integrated into the system.
JSC "Divetis" is a company established in 1994 in Kaunas, Lithuania. Few years later, it became one of the biggest importers of car security systems. It produced the Sharpshooter model in 2004. It integrated the SMD (surface-mount device) technology.
Divetis was evaluated and certified for its excellent design and creativity by an international laboratory.
Guangzhou Car-mate Technology Co. Ltd; manufactures, researches and exports car electronics products. The company produces GSM car alarm, GPS car navigation and HID (high-intensity discharge) xenon kits.
In general, prices of car alarms are affected by cost of raw materials, competitor's ceiling price and current exchange rates.
A typical car alarm package includes installation parts, switches, connectors, user manual, fitting instructions, warning stickers and key fob transmitter.
For more information on Car Alarm System Accessories and Cheap Car Alarm Systems please visit our website.
Article Source: http://EzineArticles.com/?expert=David_Urmann

Teenage car insurance- get it cheap

Are you in the market for teenager car insurance? Well, take it from me: The prices can be down right scary. As a result, it pays to shop around and find the right bargains. Here are some tips on how to find the cheapest teenager car insurance.
1. Have a car that is loaded with numerous safety features. A teen driving a car with safety features will make a dramatic difference in terms of the cost of auto insurance over all. Try to stay far away from cars that come under the ranking class of "higher hazard." Of course, you have the added benefit of knowing that your teenager is driving around on the crazy streets of your town or city in a safe vehicle.
2. There really is no substitute for a driving record that is spotless. If you are talking with your teen then I would strongly advise them on the importance of observing traffic laws and keeping a really clean driving record. If they avoid speeding tickets and reckless driving then the cost of teenager car insurance will be dramatically lower.
3. Have your teenager attend driving school. this alone can save 10% to 20 % off the car insurance rate you have been quoted. Also, you can probably find a school or local institution offering these course free of charge.
If you would like to find out more on how to save money on car insurance for your teenager, then check out the link below.
Safe driving ahead with you and your teenager.
Save 50% on Auto Insurance! Get a FREE Auto Insurance Book
Article Source: http://EzineArticles.com/?expert=George_Knoechel

Car insurance quotes- Comparison shopping can save you money

How it works - The way comparison shopping for auto insurance works is that the customer picks several Insurance companies to compare rates. There is no secret to choosing which car insurance companies to choose, you can choose based on recommendations from friends or family, or you can choose a company that you have a current or have had a previous relationship with. You can also try looking in the phone book and just going with your gut instinct. Many companies have full page ads in the yellow pages. Some will be names you recognize and some won't be, if you're not sure then just go with your instinct. Remember you are looking for 4-5 companies to compare rates for, so if 1 or 2 are questionable you still have other options. Shopping online is similar in that you get to compare multiple quotes from selected insurers in your area. The biggest difference is that with offline shopping you have to call each company individually, whereas with online shopping the agents call you with their best car insurance quotes.
Comparison shopping for car insurance works because it places the customer in control. Companies that want your business will be willing to compete if they know that you have options other than the one they are proposing. Competition is great for the insurance shopper, whether your shopping online or offline, shopping for shoes or shopping for cars. It works the same. For example my wife and I were looking for a new car 3 months ago. I went online and entered what I was looking for and had 5 different car dealerships either email me or call me with their offer. Although I shopped online, the results would have been the same had I gone to each dealership individually, however I was just illustrating a point to show comparison shopping works in any situation, particularly in insurance and finance, think about Lending Tree, their motto is " When Banks Compete You Win". The same could be said about Insurers.
The traditional way of shopping for Auto Insurance in the yellow pages, although time consuming and frustrating is still the way some people shop for Insurance, others have embraced online auto Insurance shopping. Regardless of the method you choose comparing auto insurance quotes allows you to choose the lowest rates while ensuring adequate coverage.
W.G. Moore is an Internet Marketer specializing in Insurance and Finance marketing. The authors website http://www.national-insurance-quotes.com provides a hassle free means of comparing insurance quotes from the nations top insurance companies. Visitors can obtain multiple insurance quotes for life, auto, health, renters, homeowners and condo insurance. Customers can also compare annuity investments for a complete financial plan. The website also provides direct linking to real-time insurance leads for qualified agents and brokers.
Article Source: http://EzineArticles.com/?expert=W._G._Moore

Body kits, installing them right scores major style points

An auto body kit is one of the most exciting upgrades you can do to your vehicle. A good aero kit or body kit can really transform the appearance of the vehicle, and the installer will determine if this is a good or bad transformation. I would personally suggest you find a reputable shop experienced in your type of body kit work. They should know how to work with the material you selected, and how to color match, prep and paint the kit. They should also know how to, if necessary, make adjustments to ensure a proper fitting. Your finished product will be as good as the effort put into it.Having said that, it is never a bad idea to learn something new. Before you begin, make sure you designate enough time to the project to install your body kit right the first time. This type of body work requires a lot of patience if you are inexperienced at it. Here are some instructions to help you get started on the project. The first thing to do is to prep the body kit for painting. It will be much easier to work on before it is installed. If you do not intend to paint the whole vehicle, it may be wise to color match and paint the body kit prior to installation.Start by removing the pieces that will be replaced. This may include the front and rear bumper covers. You can find the bolts for the front cover in the fender wells and underneath the cover near the frame. Remove these bolts and loosen the cover. Depending on the application, be sure to remove any of the lighting that is attached to it, such as the headlights, side markers, fog lights, etc. Now check to make sure that there isn't anything else holding it in place, such as a grille or license plate holder. Carefully remove the front bumper cover and set to the side. Keep the hardware handy, as you will need it later. Remove the rear bumper in the same manner, as well as the trim panel located just above the bumper (if applicable). Most cars won't have side skirts at this point, but if it does, remove them by removing the bolts that hold it to the vehicle. They are located on the back of the side skirts.Take your replacement cover and carefully align it to the car and check the fitting. Some of the kits will have 3M adhesive to help hold the kit in place during this process. You may find that the foam inserts are an obstruction to the new body kit. You can either remove them or trim them to size, depending on the application. I have found that if possible, it is better to trim them to fit because they will help sturdy the body kit so it doesn't appear as flimsy. If you have done your research and purchased a good kit, then you should line up almost perfect. Make some markings as to where you will drill your holes. You can also use the old bumper cover to line up the holes but it may not be as accurate as the fitting approach. If you find yourself in a situation where the kit doesn't line up exactly, there are some things you can do to correct the problem. First, locate the problem areas. They will be most noticeable on the sides where it matches up to the fenders or in the very front where it matches up to the hood. If you notice one side has a bigger seam in these areas than the other side, try moving the cover to the larger seam side in very small increments until there is no longer a difference. The seam should be the same width as other seams on the car, most notably the same size as the seam from the fender to the door, or the fender to the closed hood. Using these same widths for the seams will create a "seamless" look for the finished product.If your problem area is in the front, you will have to adjust the body kit in small increments until it lines up. If you have too larges of a seam, try gently pulling the kit from the two sides to tighten up the front. it should have a little bit of play in it since it is not bolted down. If the seam is to small, try pushing the sides in towards the front of the vehicle to free up any space. Once the front is adjusted, look to see if the sides are aligned property. If you are happy with the fitment, place the bolts in the holes and tighten them down. Start in the middle, and work your way out to the sides making sure that your seams line up properly. If your kit comes with 3M adhesive on the back side, adhere the kit to the car once the proper alignment is made. This will help hold the kit in place and allow the seams to be smaller in width. In some unfair and unfortunate circumstances, you may find your kits not lining up after all these adjustments. These kits will require some body work or fiberglass work to be done for proper fitting, such as trimming or sanding up the side edges and refinishing them, or repositioning the bolts. Hopefully you won't encounter any of these types of problems, because they tend to have to be solved on a case by case basis. If you find yourself in dire straights, contact support@majesticmodifications.com and we can help guide you to the best solution.With your front piece of the body kit installed, you can concentrate on the side skits and rear bumper cover. The side skirts should be fairly simple, and will require drilling pilot holes in the bottom of the car. To ensure proper alignment here, attach the side skirt to the vehicle using the 3M adhesive (if provided). It should line up exactly with a small seam in the front and rear next to the fenders. If the seam is larger on one side, split the difference and drill the pilot holes for the bolts and secure it in place.Now move to the rear bumper cover. Follow the same procedures as above until you get a goof fitting. Again, you may need to remove or trim the rear bumper foam inserts, depending on the shape of the body kit. Secure it in place and enjoy the finished product. Good luck, and stay TUNED!
Source: Free Articles

Auto financing scams

Car dealers are often portrayed as predators just waiting for an unsuspecting customer to come along. This is because many people believe that they are always on the prowl for unsuspecting buyers that are not very knowledgeable about cars. This can be unfair because we can argue that there are car dealers out there who would not cheat just to get an extra profit. How do you tell the difference?To avoid becoming a victim of sneaky car dealers, look out for the following auto financing scams.Yoyo scamYou will be allowed by the dealer to bring the car home as soon as possible. The dealer will take care of the financing, a few days later he will contact you again and tell you that there was a problem with your financing plan. He will tell you to set up a new financing scheme through him which, of course, will be at a higher cost and this will also entail a very high profit on the dealer's part.Be wary of this trick and avoid it at all costs if you detect it. If you have a bad credit standing, don't have your financing done by the dealer and make arrangements for your own financing. If you ever do avail of the dealer's financing, you should never drive the car back to your home immediately. Wait for at least 24 hours just to make sure that the processing of your financing scheme has been completed already. By allowing 1 whole day to pass by, you are assured that the dealer cannot use this scam on you.Window etching trickWindow etching is a very common scam. What the dealer will do is to offer to etch the VIN number of your car onto the window of the car for a price. Basically, the price ranges from as low as $300 to as high as $1,000. Some buyers think that they did a good job by being able to talk down the price to a few hundred dollars, but unfortunately for them, a few hundred dollars is still a good amount of money. The best way to avoid this kind of scam is for you to buy an etching kit that you can do on your own. This is available in most auto shops and costs around $20. See how much they profit from you!Preparation feesFor preparing your car, the dealer will often add an additional preparation fee to your bill. Just to conduct a test drive, replace fuses, or take the car's plastic cover off will have your bill increasing by at least $500! If you visit other shops, you can get the information that these add on costs are already included in the MSRP as set by the manufacturer. Some dealers automatically add it to the buyer's order to make it look mandatory. To take care of this scam, you can ask the dealer to classify it as credit (it should be identical to the amount of the preparation fee) on the following line. If the dealer does not agree to this, you can just simply walk away from the dealership. Market adjustmentThe dealer will convince you that the vehicle you want is selling like hot cakes and very popular. In order to sell you the vehicle, they will do some "market adjustments" amounting to a few thousand dollars. This is usually indicated by a tag near the MSRP tag set by the manufacturer. Even if the car you want is very popular and is very much in demand, if it is in stock you should not be tempted because getting a "popular" car is not worth it if you have to pay a few thousand dollars more. You should never pay more than the MSRP set by the manufacturers. If you do, then you are allowing others to take advantage of you.Warranty extensionAlthough this type of scam is old already, it is still being used and there are many who fall for this trick. What happens in this kind of scam is that when you make a loan for the car, the dealer will tell you that you are required to purchase an extended warranty because it is one of the conditions of the bank. There is a simple way of avoiding this scam. Ask the dealer to specify clearly in writing that the extended warranty is required for the loan to be approved. The dealer will most probably find a way to have it excluded. If he persists in including the extended warranty, do not do business with this guy and go to other dealerships. These are some of the most common auto financing scams that are utilized by some car dealers. Always keep these in mind if you are going to buy a car. If you or a friend were treated fairly by a dealer in the past, consider using the same dealership again. It’s a good indication that they do care about their customers and aren’t just looking for a “fast buck.” Think very carefully and do not buy on impulse. Good luck to you and go get that car!
Source: Free Articles
Other Interesting Articles

importing a japanese used car

The majority of used car buyers do not even consider purchasing from a Japanese car auction, because they believe it is too difficult. However if you understand the correct process then you will find it is not that hard at all. He is a snapshot of how to import a find and import a Japanese car.1. Find out all the legalities of importing a car from Japan into your country.2. If you are still looking for the right Japanese car, then find the best Japanese Car Auction websites, and start your search today.3. Make sure you check the market price before you give the go ahead to your buyer to purchase your chosen car. Always decide your budget and set a limit that you will not go above when it comes to auction day. There will always be another car that you like, so there is no need to spend more than you have set.4. Make sure you check the authenticity of the exporter/dealer before issuing them with a check. This can be confirmed through the Japanese embassy in your country, or by checking that the dealer is a member of JUMVEA - the most reputable organization in the Japanese used car industry.5. Once the car has arrived in your country, you will have to reproduce the documents that were sent to you by the dealer. You will need to pay an import tax, get your Japanese car tested and insured. Once this is all done, you are free to drive your new car home.

How do i start a hot engine in summer?

It is usually a cold engine, which is exposed to extreme weather that most often is difficult to start. However, hot engines sometimes have problems too. Hot engines can be tough to start, and many people do not know how to deal with this situation when it occurs. With the intention of overcoming this dilemma, it is important to know exactly why it happens.The most common reason why a hot engine will not start is because the problem is related to fuel. When your car engine is too hot, fuel cannot circulate well, due to the way vapour obstructs it workings and therefore the engine just will not start, as it should. You can find out more information on this subject online at autopages.com.au who suggest to keep your engine running at the correct temperature and to protect its alloys and metals, you need to use a properly designed coolant.A car engine will keep gaining temperature until it has been turned off. During this time is when the highest concentration of vapour is circulating around and chances are, that it shall obstruct the engine to a greater extent. Obviously, when and if you are driving in hot weather and have just turned off the car engine you may experience start problems. The solution is simple; you must wait for a few minutes until trying to start it again. The most sensible solution of course, is to use a high quality engine coolant.Fuel injected engines do not experience this problem as much as other engines, because the fuel remains inside the injectors under high pressure. Owing to this, fuel injected engines do not become so easily subjected to vapours as other engines. Therefore, the vehicle does not have the same issues when it comes to starting a hot engine. It may be time to change over your old vehicle to a newer model with fuel injection, and when this becomes an important issue, you can go online to OzFreeOnline.com and begin a quick search by entering and submitting all the data you have researched for your new car. Let OzFreeOnline.com do all the work for you.Another reason why you may have an engine, which is hard to start while hot, is that it may be due to seasonal weather as refiners change from one fuel blend to another. Petrol refiners often change a higher volatility fuel to a lower one when summer approaches. This is simply because hot weather causes fuel to evaporate more quickly. If refiners change back to a higher volatility fuel, while vehicles are still exposed to days of extreme temperatures, this may cause swift evaporation of the fuel which, in turn would create too much vapour within the engine.
Source: Free Articles

Bmw 650i pros and cons

The BMW 6 series was relaunched in 2004 with the BMW 645i. This car was a two door, four passenger luxury sports car. This car is ideal for a sports car enthusiast who would prefer a larger, more practical car compared to the 650's 2 passenger, lighter peers. In 2006, BMW upgraded the 645i to a 650i by increasing the engine a little. When including options and taxes, the 650i tends to run at about $80,000, so it's not exactly cheap. Here are the pros and cons of the car:
Pros
Amazing handling: The car is amazing to drive. When you drive the car, you feel as if you have total control over the vehicle. A car such as the Mercedes CLS (also priced near $80k) just cannot match this car's handling. The BMW 650i definitely has the handling one would expect from a German-made luxury sports car.
Gadgets: The BMW 650i comes with BMW's Idrive, an all-encompassing electronic system. The Idrive controls the navigation system, music, air conditioning, as well as communication system. The Idrive also has voice command, making it easy to use when driving. Some believe the Idrive is a bit difficult to operate. That's hogwash. Within two weeks of owning the car, anyone competent enough to use a computer or a DVD should be able to operate the Idrive flawlessly. The Idrive is the gadget-lover's ultimate car toy.
Interior: The interior of the 650i is beautiful. It has modern, classy feel to it. Your taller passengers will certainly appreciate being seated in the front though, as the back is not exactly spacious.
Acceleration: With a V8 and 360 hp, the car isn't exactly going to be outrun by a Civic. The acceleration and amazing breaks can also help you get out of accidents that other cars wouldn't be able to avoid.

Cons
Reliability: Expect to make stops at the service center every now and then. While it is a wonderful car, it is prone to electronic and tire issues.
Price: At about $80,000, it's not exactly in the everyman's budget. But if you are willing to spend this much money on a car, the 650i is definitely a good one to check out.



Source: Free Articles

Succeeding as an automotive marketing director

The job of an automotive marketing director is one of the most difficult in the industry. Marketing new cars, trucks, and other vehicles is an important aspect in determining the success or failure of an automotive firm. Indeed, developing winning marketing campaigns and distinguishing between your product and the competition is a key factor in drawing consumers to their local dealership. Automotive marketing directors are in charge of the busy design, sales, and administrative professionals that help put together marketing campaigns. Due to the high stress and importance of their job, automotive marketing directors may not realise that they need to sharpen their skills in order to succeed in their jobs. A director who is immersed in managing multiple marketing campaigns can often lose sight of how they can improve upon themselves. These marketing executives need to ensure that they are at the top of their game not only for their own professional success but the overall success of the firm. The question for automotive marketing directors is how they can improve upon skills while in the thick of their stressful lives. The first step in increasing productivity in automotive marketing positions is to develop an inventory of skills needed for daily success. Automotive marketing directors may be busy during their days but they need to take a few minutes to review this list of skills and determine whether they are getting the job done. These inventories are an important first step towards success. A marketing director may realise that they are not keeping up with the latest in industry news. Marketing directors in the automotive field need to stay updated on what their firm is doing, what other firms are doing, and the major trends in the automotive industry. The Internet makes finding news very easy and an automotive marketing director, with trade publications and news sites available with the click of a button. Automotive marketing departments also need directors who are creative. Directors need to look back to past campaigns on a regular basis in order to avoid repetition in corporate marketing. As well, directors need to speak with their designers and developers to determine the best way to promote new product lines. A combination of conversation and creativity can lead to great campaigns. Finally, automotive marketing directors need to be strong communicators. Directors can organise informal meetings, one-on-one sessions, and online forums in order to stay in contact with their subordinates. The ability to communicate with co-workers reflects on the ability of a director to communicate product information to the general public.
Source: Free Articles